top of page

Load data for 9 x 57 Mauser + .356 | 125gr | H&N RN KB

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

9 x 57 Mauser + .356 | 125gr | H&N RN KB

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.356 | 125gr | H&N RN KB
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.598" | 15.2mm
Caliber:
9 x 57 Mauser load data
Case Length (l3):
2.236" | 56.8mm
Cartridge Length (C.O.L.):
2.692" | 68.4mm
Seated Depth:
0.142" | 3.6mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
64.2 Grains of Water | 4.17 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B7453_C1243
Last updated:
2025-01-01

Load data for 26 loads in caliber 9 x 57 Mauser with .356 | 125gr | H&N RN KB bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
92%
36405
90%
**28
99%
Alliant Reloder-10x
<<locked>>
97%
34940
86%
**99
95%
Alliant Reloder-7
<<locked>>
90%
36071
89%
**56
96%
[Baschieri & Pellagri 106]*
<<locked>>
93%
36550
90%
**97
92%
Hodgdon TrailBoss
<<locked>>
96%
26121
64%
**32
100%
IMR 4198
<<locked>>
94%
35998
89%
**53
96%
Lovex S053
<<locked>>
85%
36201
89%
**23
100%
Norma 200
<<locked>>
94%
36158
89%
**22
96%
ReloadSwiss RS 14
<<locked>>
97%
25715
63%
**85
100%
ReloadSwiss RS 36
<<locked>>
84%
36042
89%
**49
97%
SNPE Vectan BA6 1/2
<<locked>>
87%
36419
90%
**95
100%
Vihtavuori N120 👍
<<locked>>
94%
36405
90%
**89
99%
[Vihtavuori N130]*
<<locked>>
97%
33591
83%
**90
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
25063
62%
**03
95%
[Alliant Reloder-10x]*
<<locked>>
89%
26252
65%
**46
90%
[Alliant Reloder-7]*
<<locked>>
81%
26818
66%
**00
91%
[Baschieri & Pellagri 106]*
<<locked>>
90%
33547
83%
**18
90%
Hodgdon TrailBoss
<<locked>>
81%
20175
50%
**72
100%
[IMR 4198]*
<<locked>>
83%
25454
63%
**35
90%
Lovex S053
<<locked>>
81%
32053
79%
**15
99%
[Norma 200]*
<<locked>>
84%
24424
60%
**77
90%
ReloadSwiss RS 14
<<locked>>
81%
19377
48%
**08
100%
ReloadSwiss RS 36
<<locked>>
81%
32010
79%
**54
96%
SNPE Vectan BA6 1/2
<<locked>>
81%
30327
75%
**64
100%
Vihtavuori N120
<<locked>>
81%
23786
59%
**25
95%
[Vihtavuori N130]*
<<locked>>
90%
26948
66%
**97
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page